Weber-tylon® WB 300
Weber-Tylon® WB 300 Self-Leveling Screed is packed in 20kg polythene-lined paper bags.
Weber-tylon® WB 300
Weber-tylon® WB 300 high-performance self-leveling screed is an advanced, high-strength polymer-based underlayment developed for residential, commercial, and light industrial applications. This product is specially formulated to provide a high degree of flow and workability for application to large areas and correcting uneven sub-floors before the installation of floor coverings.
Its high strength formulation is suitable to repair a range of sub-floor types including sand and cement screeds and concrete floors. Once applied, the floor is able receive light foot traffic after 1-2 hours. Floor coverings – such as carpet, tiles, vinyl and engineered wood – can typically be installed 24 hours after application.
For leveling solid bonded substrates:
- Concrete
- Sand/cement screeds
- Anhydrite screeds (calcium Sulphate based)
- Commercial and Industrial Grade
- Self-smoothing thin topping screed
- 30 MPa
- Excellent workability
- High load-bearing
- Low dust emission during grinding
- Self-drying
- High Performance
- Superior flow and strength
- Low shrinkage
- Not to be left without a suitable covering
| Application temperature | 10°C – 30°C |
| Minimum Substrate strength | 1N/mm² |
| Minimum Thickness | 3mm |
| Maximum thickness | 20mm |
| Water demand | 4.8 liters /20 kg |
| Compressive strength | > 30 N/mm² after 28 days |
| Flexural strength | >7 N/mm² after 28 days |
| Shrinkage (28 days) | < 0.05% |
| Weber flow rate | 240-260mm |
| Approx. material consumption | 1.8kg/m²/mm |
| Hardening time (before foot traffic) | 1-2 hours |
| Hardening time (before final covering) | 12 hours |
| Pot life | 30 minutes |
| *Data provided based 23°C and 50% relative humidity | |