tylon® 18 hr Set
20 kg
18 hr set adhesive for all types of tiles
Weber-tylon® 18 hr set is a cement-based high strength, thick and thin bed tile adhesive for the fixing of porcelain, ceramic, clay, brick, cement and natural stone tiles to walls and floors. Produced from carefully selected raw materials for consistency of product, it only requires the addition of water on site.
Coverage
Depending on the nature and evenness of the surface and method of application, coverage is approximately 6 m² per 20 kg bag when applied using a 6 mm notched trowel (wall tiling) and 4 m² per 20 kg bag when applied when using a 10 mm notched trowel (floor tiling) ie꞉ based on a level/even floor.
Initial setting time | approximately 6 hours |
Final setting time Correction | approximately 18 hours |
Corection time | approximately 20 minutes |
Open time | approximately 20 minutes |
Pot life | approximately 4 hours |
Grouting time | approximately 18 hours |
Water demand | approximately 5 litres per 20 kg |
Temperature resistance | 70 °C |
Application temperatures | Do not apply in temperatures below 5 °C or above 30 °C |
Note꞉ all the data given was obtained at a temperature of 23ºC and 50% relative humidity. | |
Reaction to fire | Class A1/A1 |
High initial tensile strength | > 0.5 N/mm² |
High tensile adhesion strength after heat ageing | > 0.5 N/mm² |
High tensile adhesion strength after water immersion | > 0.5 N/mm² |
High tensile adhesion strength after freeze/thaw | > 0.5 N/mm² |
- 18-hour set
- Interior and exterior application
- Can be applied up to 20 mm thick
- Anti-slip properties
- Suitable for wall and floor use
- Consistent quality - ISO 9001 and 14001 accredited manufacturer
Uses
Weber 18-hour set tile adhesive is suitable for fixing porcelain, ceramic, clay, cement, natural stone tiles to cement plaster, screeds, concrete and other pre-primed surfaces.
• Suitable for interior and exterior use
• Suitable for use on walls and floors
• Do not use this product on white or light colored marble or porous porcelain tiles as it might cause discoloration at the tiles. Weber Set White is recommended for this purpose.