Weber Barrier acrylic fibre
Fibre reinforced acrylic waterproofing polymer
Weber Barrier acrylic fibre is an acrylic and reinforcing fibre blended waterproofing compound, forming a highly flexible non slumping liquid applied emulsion. The presence of a long synthetic fibre mixed into the compound, eliminates the need for a separate waterproofing membrane and forms a homogeneous seamless waterproofing system.
Weber Barrier acrylic fibre is suitable for; parapet walls, tiled roof cappings, flashings, properly graded roof decks, lap joints, roofing screws, water features, fish ponds and many other waterproofing details.
Weber Barrier acrylic fibre is most effective in areas were no excessive movement takes place and were the use of a traditional membrane system is too time consuming or in the presence of excessive detail.
Weber Barrier acrylic fibre is suitable for areas of long term ponding but in such areas it must be used in conjunction with a synthetic latex primer.
|Application||Brush, roller or spray|
|Coverage||1.0L/m2 (depending on surface porosity)|
|Total solids||+/- 60%|
|Specific gravity||+/- 1.2|
|Viscosity||Soft viscous paste. 150 Krebbs units at 25°C|
|Drying time||Stipulated below|
|Cleaning||Water when wet. Ethyl acetate when dry|
- Easy to apply
- Recommended for all tile & metal sheeting roofs
- Membrane free