Weber Barrier acrylic flex
5L
A pure acrylic waterproofing polymer
Weber Barrier acrylic flex is a pure acrylic waterproofing polymer, modified with Latex, that allows extreme flexibility, UV stability & adhesion.
The dry film characteristics are unlike traditional waterproofing compounds, showing over 350% elongation and a life expectancy of 8 years.
When reinforced with stitch bonded polyester, it forms a homogeneous seamless waterproofing system. Weber Barrier acrylic flex in conjunction with stitch bonded polyester is suitable for; flashings, parapet walls, properly graded roof decks, lap joints, roofing screws and many other waterproofing details.
Colors
Not to be used on Bitumen Waterproofing Products
| Application | Brush, roller or spray |
| Coverage | 2.0L/m2 (depending on surface porosity) |
| Total solids | +/- 70% |
| Specific gravity | +/- 1.2 |
| Viscosity | 100 Krebbs units at 25°C |
| Drying time | Stipulated below |
| Cleaning | Water when wet. Ethyl acetate when dry |
| Flammability | Non-flammable |
Features and Benefits:
- Easy to apply
- Recommended for all tile & metal sheeting roofs
- UV stable and resistant
- 350% stretch
- Non-toxic
Uses:
For water proofing of the following:
- Pitched roofs - tiled, slate, iron & timber, as well as cracked tiles, tile joints & roof ridges
- Parapet walls, flashings & small flat roofs (<20m²)
- Fish ponds, water features & water-retaining structures (use a cementitious slurry as a primer)
Use as a maintenance coat on existing acrylic waterproofing systems Including chimneys & skylights
Uses
For water proofing of the following:
- Pitched roofs - tiled, slate, iron & timber, as well as cracked tiles, tile joints & roof ridges
- Parapet walls, flashings & small flat roofs (<20m²)\ Fish ponds, water features & water-retaining structures (use a cementitious slurry as a primer)
- Use as a maintenance coat on existing acrylic waterproofing systems Including chimneys & skylights