Gamatex New Product
Gamatex
25 kg
Decorative textured acrylic bonded finishing plaster
Weber Gamatex is a trowel applied textured acrylic bonded plaster available in various colours. This product contains selected graded aggregates to produce a grooved finish resulting in various patterns.
STEP 1
Remove high spots, ensure clean, sound surface.
Apply primer where required.
STEP 2
Mix product in bucket.
DO NOT thin. After mixing use as is.
Coverage: 25 kg mixed product covers 6 m2 applied in 1 hour.
STEP 3
Apply Weber Gamatex with a steel trowel.
STEP 4
Float with a plastic trowel to either vertical or random pattern.
Drying time: Approx. 12hrs (surface dry = 2hrs, hard dry = 12 hrs ) depending on weather conditions (temperature and humidity).
Curing time (before sealing if required): 7 days to fully cure but sealing coat can still be applied after 12hrs when it is hard dry.
Do not apply:
» If frost is forecast within 24 hrs of use
» In damp / wet conditions
» In temperatures below 5 oC or above 30 oC
» In direct sunlight
Best to begin application early in the morning, when it is cooler. Equipment should be cleaned with water immediately after the application has
been completed.
Please note: Correct surface preparation is critical to ensure the proper performance of Weber Gamatex.
Please follow the instructions carefully.
Coverage is approximately 5–6 m2 per 25 kg bucket (1 coat) at 2.5 mm thick (aggregate size less than 2.5 mm).
• Vertical texture effect
• Swirling texture effect
• Superior adhesion
• For exterior and interior application
• For plastered and painted walls
- Suitable for interior or exterior use on either plastered or painted walls that have been properly prepared.
- Textured finishing plaster, available in various colours, negating the need to apply a paint finish.
- May be sealed to further enhance and protect the wall surface with a suitable sealer.
- Supplied ready to be used.
