WB16 Ceramic & Porcelain
WB16 Ceramic & Porcelain is a cement-based, thick and thin (3-20 mm) bed tile adhesive for the fixing of ceramic and hard body ceramic tiles to walls and floors. Produced from carefully selected raw materials for consistency of product, it only requires the addition of water on site.
Depending on the nature and evenness of the surface and method of application, coverage is approximately 6 m² per 20 kg bag when applied using a 6 mm notched trowel (wall tiling) and 4 m² per 20 kg bag when applied when using a 10 mm notched trowel (floor tiling) ie: based on a level/even floor.
| Initial setting time | approximately 12 hours |
| Initial setting time | approximately 24 hours |
| Time | approximately 20 minutes |
| Open time | approximately 20 minutes |
| Pot life | approximately 8 hours |
| Grouting time | approximately 24 hours |
| Water demand | approximately 5 litres per 20 kg |
| Temperature resistance | 70 ºC |
| Application temperatures | Do not apply in temperatures below 5 ºC or above 30 ºC |
- 24-hour set
- Interior and exterior application
- Suitable for wall and floor use
- Can be applied up to 20 mm thick
- Anti-slip properties
- Easy to mix and apply
- Consistent quality - ISO 9001 and 14001 accredited manufacturer
- WB16 Ceramic & Porcelain is suitable for fixing ceramic and porcelain tiles to cement plaster, screeds, concrete and otherp re-primed surfaces
- Suitable for interior and exterior use
- Suitable for use on walls and floors
- Note: Replace water in mix with Bond-It for all exterior and ‘wet’ areas i.e. Showers and areas exposed to large changes in temperature (bathrooms, kitchen areas)