Quick Set 6
20 kg
6 Hour set tile adhesive
Weber Tylon QuickSet 6 White is a cement-based, high strength, quick-set, thick to thin (3-20 mm) bed tile adhesive for the fixing of porcelain, ceramic, brick, clay, cement and natural stone tiles to walls and floors. Produced from carefully selected raw materials for consistency of product, it only requires the addition of water on site.
Depending of the nature and evenness of the surface and method of application, approximately 6 m² per 20 kg bag when applied using a 6 mm notched trowel (wall tiling) and 4 m² per 20 kg bag when applied using a 10 mm notched trowel, (floor tiling) i.e. based on a level/even floor.
| Initial setting time | approximately 3 hours |
| Final setting time | approximately 6 hours |
| Correction time | approximately 20 minutes |
| Open time | approximately 20 minutes |
| Pot life | approximately 1 hour |
| Grouting time | approximately 6 hours |
| Water demand | approximately 5 litres per 20 kg |
| Temperature resistance | 70ºC |
| Application temperatures | Do not apply in temperatures below 5ºC or above 30ºC |
| Note: all the data given was obtained at a temperature of 23ºC and 50% relative humidity. | |
- 6-hour set
- Interior and exterior application
- Suitable for Ceramic, Porcelain, Brick, Clay, Cement and
- Natural Stone tiles
- Easy to mix and apply
- Suitable for wall and floor use
- Consistent quality - ISO 9001 and 14001 accredited manufacturer
